|
24
Volt Vertical-Pivot-Lift
Gates Specifications
|
| OPERATOR: |
- Meets UL 325 Specifications. (Certified early
2001)
|
| CONSTRUCTION: |
| Frame /
Gate: |
2" Sq., 11 Ga. (.120) Red Kote
Steel Tubing Vertical Pickets: ¾"
Sq., 16 Ga. Galv. |
| Chain Link: |
2-3/8", Sch. 40 & Sch.
20 Tubing 11 Gal. Fabric |
| Operator
Skins: |
18 Gal. Galvaneal Sheet Mounting
Pads: 304 SS |
|
|
|
RUSTPROOFING &
LUBRICATION:
|
All internal Operator Parts, Springs,
Spring Adjustment Tube, Adjustment Screws are rustproofed
with |
| LUBRICATION: |
Texaco Compound "L". All moving
parts are built with factory installed grease fittings
for proper P/M |
| PAINT: |
Polane Semi-Gloss / Spatter Finish. Standard
Colors: Black, White, Brown & Green (Custom colors
available). |
| GATE HARDWARE:
|
Gate mounting hardware is 304 stainless
steel. |
| WINDBRACING:
|
100 mph design, ¼" aircraft
quality coated cable. Length = 60% of gate |
| OPERATOR
SIZE: |
- Type: VPL-24
- Length: 68"
- Height: 51"
- Width: 36"
|
| GATE LENGTHS: |
10' - 24' (Consult factory for gates
over 24'). |
| GATE HEIGHTS:
|
- 4'- 12'from
pad grade (Gates over 8'vAll require special crating
& freight arrangements).
|
| DUTY CYCLE:
|
Continuous. |
| MOTOR
BRAKING: |
Dynamic Built-In Motor Braking. |
| POWER
SUPPLY: |
- 120v AC with
24v DC Battery Back-Up. (2) 12v Batteries required,
NOT included.
|
| POWER
MAINTENANCE: |
POWER MAINTENANCE: |
| CONTROL
CIRCUITRY: |
Solid state coated Control Board in NEMA
4x weatherproof electrical enclosure. Sealed Proximity |
| CONTROL WIRING: |
16 & 18 Ga. single conductor. Copper
w/electrolytic copper compression terminals tin-plated
for maximum corrosion prevention. |
| GEAR MOTOR:
|
- Horse Power:
1/3
- Gear Type:
Hardened Steel
- Bearing Type:
Ball
- Gear Lube:
Dextron 11 E ATF (Rated to -70 F)
|
| DOUBLE
GATES: |
Control Panel can be set to accommodate
2nd Operator or Sallie Port with another Operator (Optional
Add). |
| OPEN /
CLOSING CYCLES: |
|
| DELAYED
CLOSING: |
- Adjustable
from 0 - 60 seconds.
|
| OBSTRUCTION
SENSOR: |
- Adjustable
IRD senses obstructions opening or closing.
|
| SEC. BREACH
PROTECTION: |
- 24v built-in
System Brake as 120v or battery power is present.
|
| REVERSING EQUIPMENT: |
Reversing/Safety Loop, Leading Reversing
Edge, Infra-Red Reversing Beams, Siren or Optical Operated
Sensors. |
| SHIPPING WEIGHT: |
Typical VPL-24 Operator with 6' high
x 16' long Buckeye style gate = 1,200 lbs. |
COMPATIBLE CONTROLS:
|
Keypad, Card Reader, Intercom, Telephone, Wireless &
Siren or Optical Operated Sensors.
|
| WARRANTY: |
Res. = Five (5) Years / Comm. = Three
(3) years from date of shipment on manufactured components
and workmanship. Purchased components and accessories
are covered under their respective warranties
(See full Warranty for details).
|
| PM CYCLE: |
Grease all fittings every 10,000 cycles
or every 3 months. Check gate balance annually. |
| |
