 |
GTO PHOTOELECTRIC
DUAL BEAM DETECTOR |
The GTO/PRO Photoelectric Dual Beam Detector uses dual beam and through beam technology to reduce false detections when detecting obstructions. When the beams detect the presence of a moving object, the detection will cause the gate(s) to stop and reverse to the fully open position. As long as the beam is obstructed the gate(s) will remain open. Can be used with all GTO/PRO and Mighty Mule AC and DC powered gate operators.
Not compatible with solar powered gate operators.
|
R4222 GTO Photo Beam $65.00  |
| More Information (pdf) |
|
SOS-II Siren-Operated Sensor |
| SOS-II Siren-Operated Sensor $379.00 |
THE SOS
Fire/Police/EMS/911 responders, open gates
with Siren's "yelp" in 2.5 seconds (all sirens in 4.5),
hands free.... No codes to remember or keys to lose. A reminder
decal on gate tells responder to hold siren on for swift entry.
Gate Owners pay only $379.00 for safety and peace of mind!!! Mandate
that your gated communities be uniformly 911 "respondable".
Thousands now in use! Compatible with all gate operators. Protects
property, loved ones. Homeowners who are gone when the fire breaks
out will be glad you did.
More
Information |
|
|
Square Gate Edge (MGS20)
|
| MGS20 -
Square Gate Edge $189.00 |
Square Gate Edge
Designed specifically for easy installation
on standard 2" square frames, the MGS20 offer 3-sided activation
for an added measure of protection. When touched, these electrically
activated edge sensors immediately signal the gate operator to
stop and reverse. The sleek design will not detract from the appearance
of the gate.
More Information |
|
|
Round Gate Edge (MGR20) |
| MGR20 -
Round Gate Edge $189.00 |
Round Gate Edge
Designed specifically for easy installation
on standard 2" round frames, the MGR20 offers 3-sided activation
for an added measure of protection. When touched, these electrically
activated edge sensors immediately signal the gate operator to
stop and reverse. The sleek design will not detract from the appearance
of the gate.
More Information |
|
|
Transmitter / 1 Channel Receiver (MWRT02) |
| MWRT02 -
$120.00 |
Combo comes with the Miller edge model MWR02 single channel receiver and MWT02 gate edge transmitter.
|
|
|
Transmitter with Audible Alarm and / 1 Channel Receiver (MWRTA02) |
| MWRTA02-
$189.00 |
Gate Edge Transmitter
The MWTA02 comes with an Audible Alarm feature
that activates when the battery has only 25% of it life remaining,
indicating the battery should be replaced. The alarm sounds for
5 to 10 seconds at 1 to 2 minutes intervals.
(Transmitter use with Gate Edge Receiver MWRT02)
|
|
|
| Retro reflective sensor (PB1200) |
PB1200 12V Photo-Eye $129.00
|
PB1200 Retro-Reflective Photoeye Package.
Retro reflective sensor, economical, 25 ft. range, with reflector, and mounting bracket. N/O or N/C output, 12/24 AC & DC.
The Complete Package Includes:
- Reflector Sensor
- Reflector
- Mounting Bracket
|
|
|
Post Mount (IRBS) |
| IRBS -
Post Mount $49.65 |
NIR Post Mount
Mounting pedestal for NirPlus & IRB-325 & PRX-320 |
|
|
Infrared Photocell (IRB-325) |
| IRB-325 -
Infrared Photocell $287.00 |
Infrared Photocell
The IRB-325 Photocell is used as an external
entrapment protection device type B! non-contact sensor for use
with the automatic gate Opener. The IRB-325 complies with UL325
standards
More Information |
|
|
| |
The Falcon (BEA) |
10FALCON -The Falcon (High Mounting)$329.00
10FALCONXL -
The Falcon (Low Mounting) $329.00
10REMOTE - The Falcon
Remote $37.50 |
The Falcon
A universally compatible with any industrial
door or automatic gate operator. Can detect traffic moving both
towards and away from your industrial door or gate. Ability of disregarding
pedestrians and only detect large masses. Capable of disregarding
parallel traffic. Can be mounted 7' -11.5'' |
|
|
Vehicle Safety Loop Detector
D-Tek Loop Detector/Harness
(Power 12V AC/DC, 24V AC/DC, 110V AC/DC, 220V AC/DC)
Operating Temperature: -40 Degrees to 180 Degrees Fahrenheit
MVPDTEK D-TEK Loop Detector $199.00..... |
Vehicle Safety Detector
Prevents normal gate closing cycle if several
vehicles are passing through gate(s) in a short time period, thus
reducing the possibility of vehicle damages. Use with Loop
Detector Wire
More Information |
|
|
Loop Detector (LOOPDT1) |
| LOOPDT1 -
Loop Detector $120.00 |
Loop Detector
One Channel Single Channel Loop Detector
Designed for GTO/PRO or any brand gate operator providing 8-26
V AC/DC. Low power consumption makes it an ideal detector for
solar applications. Dip–switch adjustability for frequency
and sensitivity, and provides easy serviceability with a plug
in terminal Solar Compatible.
More
Information |
|
|
Loop Detector Wire |
| LWK500 -
Loop Detector Wire $58.00 |
Loop Wire Kit (500'
Loop Detector Wire)
(For use with the Loop Detector "LOOPDT1" and "Vehicle
Safety Detector") |
|
|
Lite Pre-formed Loop |
| PL48 -
Lite Performed Loop $128.00 |
Lite Performed Loop
(PL-4x8) Rugged and flexible TPE tubing with overall diameter of 0.26
inches suitable for saw cut, tar and concrete installation. Comes
with 50 ft. of twisted and jacketed lead in wire.
Loop is 4x8 in length |
|
|
16' Coil Cord & Junction Box (C18216) |
| C18216 -
16' Coil Cord & Junction box $45.00 |
16' Coil Cord & Junction
Box
18 gauge - 2 Conductor Coil Cord |
|
|
Cantilever Gate Roller Safety Guards-Galvanized Steel
 Fits both 3" and 4" Posts |
RSCT- Top Bar $14.50 |
More Information |
