1. Digital Keypad (F300) | Back To Picture |

Can be easily installed as a wired or wireless keypad and can be programmed to recognize as many as twenty-five (25) different personal identification number (PIN) codes. This keypad can also be used with the Bulldog pedestrian gate lock. Requires 3 AA batteries (not included).

2. Residential Wireless Intercom/Keypad (F3100) | Back To Picture |

This versatile digital keypad and system is ideal for any residential application, alerting you of visitors and allowing gate operator activation from the safety of inside your home. The intercom provides superior range with crystal clear two-way communication up to 500 feet wireless or 1,000 feet wired. The digital keypad feature provides as many as 25 unique entry codes allowing activation of the gate operator from up to 100 feet wireless or 1,000 wired. Interior intercom is mobile and can be used anywhere in your home.

3. Transmitters: Single (RB741) Dual (RB742) Triple (RB743)
Mini (RB744) | Back To Picture |

The single button transmitter is included with all GTO/PRO Gate Operators. The dual and triple entry transmitter can be used to control multiple operators, or for garage doors and gate openers when used with the (RB709) universal garage door receiver. All transmitters have
adjustable code settings, frequency is 318Mhz

4. Driveway Wand Sensor (FM139-50 ft.) (FM140-100 ft.) (FM141-150 ft.)
| Back To Picture |

Automatically activates any brand of gate operator to open when a vehicle approaches. Provides for easier installations and proven more reliable than traditional loop systems. The wand sensor is ideal for solar applications, powered by 8-32vAC or 8-26vDC. May not be used as a safety device.

5. Loop Detector (LOOPPDT1) | Back To Picture |

Single channel loop detector designed for GTO/PRO or any brand gate operator providing 8 – 26 V AC/DC. Low power consumption makes this an ideal detector for solar applications. Dip- switch adjustability for frequency and sensitivity, and provides easy service- ability with a plug in terminal strip.

6. Pre-formed loops | Back To Picture |

Saw Cut or Pave Over (4’x8’ and 6’x12’ sizes) works in conjunction with the GTO/PRO loop detector to provide vehicle detection for Free exit, Shadow, Interrupt, or Reporting applications. Compatible with other brands of loop detectors and gate operators. Pave Over models provide a fully pre-assembled loop, whereas the Saw Cut versions allow for more installation .exibility.

This handy device allows GTO/PRO transmitters to
activate any brand garage door opener, enabling
you to replace multiple transmitters with a single
GTO/PRO transmitter (RB742 and RB743). Operates
on 12 or 24V AC/DC and can be used as normally open or normally closed relay output gate operator receiver on any brand of gate operators.

8. Push Button Control (RB101) | Back To Picture |

This unlit push button is for entry or exit control. Connects directly to the control board using GTO/PRO 16 gauge stranded, low-voltage, direct burial wire, up to 1,000 ft.

9. Bulldog Pedestrian Gate Lock (FM145) | Back To Picture |

Designed for horizontal use on “walk-thru” gates. The Bulldog is an affordable solution for protecting swimming pool areas, playgrounds, tennis courts, boat docks, etc., from unwanted access. Can be used with GTO/PRO Digital Keypad (F300) and is solar compatible.

10. Pin Lock (FM345 / FM345KA) | Back To Picture |

The pin lock (RB975) is a substi- tute for the clevis pin at the front mounting point of the GTO/PRO DC series swing gate operators and the chains of the DC slide gates to hinder theft of the operator. Also available with matching keys for multiple gate operators. (RB975KA)

11. Automatic Gate Lock (FM144/FM142) | Back To Picture |

Designed for added security in conjunction with all single and dual GTO/PRO DC swing gate operators. The gate lock unlocks and locks automatically when the gate opens and closes, and is recommended for all areas with high wind conditions. Includes a keyed manual release, is solar compatible, and Fail Secure. (Closed position, FM144, or open position, FM142)

12. Solar Panel (FM122/ FM123) | Back To Picture |

The FM122 5 Watt and FM123 10 Watt solar battery
chargers are for use with GTO/PRO low voltage
automatic gate operator systems. Great for remote installations. The solar panel comes with tubular steel support, mounting clips, wire connectors, and 8 ft. of low voltage wire. All GTO/PRO DC operators are pre-wired for the solar panel.